{"id":797,"date":"2023-11-16T12:55:41","date_gmt":"2023-11-16T12:55:41","guid":{"rendered":"https:\/\/vista.development-visionsharp.co.uk\/locusrite2\/product\/rcs-25-14-restraint-channel-system\/"},"modified":"2026-03-02T10:45:18","modified_gmt":"2026-03-02T10:45:18","slug":"rcs-25-14-restraint-channel-system","status":"publish","type":"product","link":"https:\/\/vista.development-visionsharp.co.uk\/locusrite2\/product\/rcs-25-14-restraint-channel-system\/","title":{"rendered":"RCS 25\/14 Restraint Channel System"},"content":{"rendered":"
When attaching to steel, self-drill\/self-tapping screws fix through the channel, insulation and CP board into the steel frame. The screws have an under-head high thread which offers maximum support to the channel, but prevents compression of the insulation material. For large insulation thicknesses and flexible insulation, compression sleeves may be required, please contact Vista Technical team for details.<\/p>\n
In the case of fixing to concrete, screws run through the channel and insulation inside a compression sleeve, and into pre-drilled pilot holes in the concrete. Compression sleeves ensure the insulation is not deformed.<\/p>\n
The channel sits in the cavity abutting the insulation layer. VS9 ties twist into the channel to tie across the cavity into the masonry bed joint. The ties can be positioned at any point along the length of the channel.<\/p>\n
SFC 25-14 Restraint Channel<\/b><\/a><\/p>\n The Vista 25\/14 restraint channel is available in lengths of 2700mm. It features alternate 5.5mm and 9.5mm diameter pre-punched holes, at 112.5mm centres to ensure a fixing position is always located near the end of each channel length. The smaller 5.5mm holes are used when fixing to steel with Vista self-tapping screws; the larger diameter holes are for fixing to concrete with self-tapping, fully-threaded concrete fasteners. A 16mm opening in the channel allows the use of 16mm washers with the fixing screws. The smaller holes can also be used when attaching to a timber frame – please contact Vista technical support when using this application. NB: if the wrong combination of screws and holes are used during installation, the system\u2019s performance will be compromised.<\/p>\n VS9 – Steel Channel Tie<\/b><\/a><\/p>\n The VS9 head has been specifically designed for use with 25-14 channel systems. The tie incorporates a radiused notched head profile which ensures the tie won’t clash with the screw head, allowing the tie to be positioned anywhere along the length of the channel. Cavities up to 250mm can be accommodated using ties with a projection from 75-300mm. The ties are manufactured from grade 304 stainless steel and are non-combustible (as defined in the national Building Regulations). They also offer excellent corrosion resistance and a service life of not less than 60 years.<\/p>\n